The Toughest 60kW
Portable Electric Heaters on the Market!
Mosebach has done it again! We’ve squeezed more heat into a smaller and more practical package. The HotBox XtremeQ™ takes our load bank-proven resistor design one step further.
HotBox XtremeQ™ uses Mosebach’s unique SlimLine™, a continuous resistor ribbon that contains no welds. This design has been proven on many load bank applications. We have now adapted the technology for use in small, portable electric heaters.
The HotBox XtremeQ™ is ideal for heating large spaces, buildings, and machines and processes, without the problems of kerosene or propane heating, such as
mold-causing moisture, fires, and carbon monoxide. Some of the other possible HotBox XtremeQ™ applications are:
• As blowers only
• Heating warehouses and tents
• Heating buildings under construction
• In heavy industries, such as steel mills, refineries, chemical processing, etc.
• In eliminating condensation, dehumidification processes and removing the moisture from building structures
ADVANTAGES OVER THE COMPETITION:
• Unique design: three heaters in one
• Can work in fan mode only
• Variety of options to rent or to use as (fan only, 20 kW, 40 kW or 60 kW electric
heater)
• Option to disable each stage of heating simply by turning the circuit breakers in
“OFF” position. Circuit breakers are tied in series with 22mm ON/OFF load switches
• Weatherproof enclosure (ducting must be attached)
• Size, portability, weight and dimensions
• User friendly
• Heavy-duty, Mosebach’s own stainless steel heating elements with unmatchable
3-year warranty
Heating Elements: HotBox XtremeQ™ uses our unique SlimLine™, the toughest resistor element available. This element allows for maximum heat transfer in the smallest space. We’re so sure of it, we offer an unmatchable 3-year warranty on resistors!
Cooling: The heating elements are cooled by an integrally-mounted, double inlet, low noise, 3-phase centrifugal blower.
Controls: HotBox XtremeQ™ is controlled by a combination blower-on/thermostat 22mm switch, one master red mushroom ON/OFF switch that doubles as an E-stop button and 22mm ON/OFF switches for each stage of heating. An air flow indicator lamp and an overtemperature lamp are provided as well. The thermostat allows for temperature control. Two circuit breakers have been installed in series with contactors. By turning the breakers in the OFF position, the client can disable each stage of heating and rent each unit as a 20 kW, 40 kW or 60 kW heater or fan only.
The controls are NEMA 3R and are recessed to prevent accidental damage. No additional power required.
Power Connection: Recessed, cam-lock type connectors (A, B, C and N), 400A rated,
are provided for easy and safe connection to the power source.
Controls and Fuse Access: The top removable panel allows easy access to all control components and the high-quality fuses.
Construction and Maneuverability: L = 37”; W = 24.5”; H = 33”. HotBox XtremeQ™
is made of heavy-duty, rugged sheet metal with expanded-metal inlet and exhaust coverings. The paint finish is electrostatic powder-coated, scratch resistant - the toughest finish available. Extreme maneuverability is provided by two fixed casters and two swivel casters. Forklift channels and four lifting eyes are also provided
for easy maneuvering and lifting.
Weather Rating: Each HotBox XtremeQ™ is weatherproof rated. 20” ducting must be attached.
Ducting: 2 x 20” ducting rings with four clamps are optional for the customer to
connect their flexible ducting.
Safety: Each heater is provided with an overtemperature switch (automatic reset).
In case of low air flow, the air pressure switch will disconnect the power to the
unit. Every electric circuit is protected by heavy-duty fuses and magnetic contactors.
E-stop button is provided for emergency shut down. Motor is protected by fused
motor starter. Ground lug and overtemperature indicator lamp are standard. All
components are rated for 600V. And because the heating is electric, there is no risk of dangerous fumes, fires, or mold-causing moisture.
Options Available for Purchase:
1. 2 x 20” ducting rings with four clamps
2. Ducts: 25’or 50’
3. Remote thermostat with 50’ cable
4. Mating female cam-lock type connectors (A, B, C and N), 400A rated
Warranty: The HotBox XtremeQ™ has a standard one-year warranty on workmanship
and materials, and an unmatchable 3-year warranty on the resistor elements.
We also have a line of smaller heaters available – the original HotBox™, from
10 to 30 kW and larger 90 kW, 150 kW and 180 kW HotBox Xtreme™ and HotBox XtremeQ™. |
