MegaBank™ MBX1500 is an extension to Mosebach's load bank family, building on the strengths of the original MegaBank™. We have adapted the blower from a tube-axial to a centrifugal design, which offers more uniform airflow at a reduced sound level.

The MegaBank™ MBX1500 is a continuous duty, lightweight load bank that is easy to transport, set up and operate.

The MegaBank™ MBX1500 can be used for testing generators, UPS systems and static inverters up to 1515 kW in 5kW increments or up to 1600kW in 40kW increments.

Standard voltages available are 480/240/208V 3 phase, 60 Hz. A 200V 3phase 400Hz option is also available. 600V and other voltage versions are also available.

Mosebach has a long history in the rail and mining industries, where its resistors are used in large power (4,000 kW typical) dynamic brake systems. Thousands of our resistors are used daily in locomotives and giant mining trucks in the USA and around the world.

Mosebach has taken its expertise in large power resistors and applied it to these smaller power load banks. Specifically, we have developed the SlimLine™ resistor, which has superior insulation and heat transfer capabilities.

The resistor element is a stamped stainless steel plate held in place with mica insulators. There is no ceramic to shatter, no metal rods to short-circuit, and no bailing wire to cause a cascade failure of the load bank's resistors.

FEATURES:

• Rugged steel enclosure with scratch-resistant powder-coat paint system.
• Heavy-duty construction with mounting provisions and lift truck channels make it ideal for trailer or pad-mounting.

• High-volume, low-noise centrifugal blower with horizontal discharge.

• Digital meter (50/60 Hz) to indicate volts, amps, kW, frequency, and more. Option for 400Hz voltages. Option for data logging capability.
• Switches for master on/off, blower on/off, voltage selection, load shock, load dump, motor phase reversal and steps on/off.
• Test jacks for voltages.
• Airflow and overtemperature indication lamps.
• Steps are controlled by magnetic contactors.
• Power circuit fuses.
• Control power from the bus or customer supplied. Control circuit fuses are included to protect contactor coils and meter, and a motor starter for the blower.
• Customer connection is via cam-lock terminals for easy connect and disconnect. Bus bars can be provided and are optional.

Dimensions: L = 109”; W = 78”; H = 58”

Resistors
SlimLine™ resistors consisting of a stamped stainless steel plate held in place with mica insulators. 2-year warranty.

• 400 Hz meter
• 50/60 Hz meter with data logging
• 25’ or 50' cable set with mating female cam-lock set
• Mating female cam-lock set
• Bus bars
• Single-phase testing capability (select models only)
• Vinyl cover
• Remote and PLC-control capabilities are available.
• Weather rated enclosure
• Trailer